1987 Dodge Charger Tire Size & Pressure
The 1987 Dodge Charger tire size depends on trim: the Base, Automatic takes P165/80R13; the Base, Standard takes P165/80R13; the Shelby takes P205/50VR15, per the factory service manual.
- Base, Automatic: P165/80R13
- Base, Standard: P165/80R13
- Shelby: P205/50VR15
Base, Automatic
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P165/80R13 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
Base, Standard
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P165/80R13 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
Shelby
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P205/50VR15 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
More Charger Specs & Repair Guides
🛢️ 1987 Dodge Charger Oil Type & Capacity →🌧️ 1987 Dodge Charger Wiper Blade Sizes →💡 1987 Dodge Charger Light Bulb Sizes →📖 1987 Dodge Charger Factory Service Manual →Powered by factory manual data from our partner network AllOEMManuals.com.
Frequently Asked Questions
What size tires does a 1987 Dodge Charger take?
It depends on the trim: Base, Automatic uses P165/80R13; Base, Standard uses P165/80R13; Shelby uses P205/50VR15.
What is the tire pressure for a 1987 Dodge Charger?
Refer to the tire pressure placard on your vehicle's driver side door jamb for exact cold inflation pressures.
What is the bolt pattern on a 1987 Dodge Charger?
Bolt pattern data is available in the factory service manual.