1986 Lincoln Mark VII Tire Size & Pressure
The 1986 Lincoln Mark VII tire size depends on trim: the Base takes P215/70R15; the Bill Blass Edition takes P215/70R15; the LSC takes P215/65R15, per the factory service manual.
- Base: P215/70R15
- Bill Blass Edition: P215/70R15
- LSC: P215/65R15
Base
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P215/70R15 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
Bill Blass Edition
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P215/70R15 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
LSC
Tire Specifications
| Position | Tire Size | Pressure | Load Index | Speed Rating |
|---|---|---|---|---|
| All | P215/65R15 | Door Placard | — | — |
Search by this configuration
Retailer searches do not verify vehicle fitment. Check the driver's door placard and wheel setup before ordering.
More Mark VII Specs & Repair Guides
🛢️ 1986 Lincoln Mark VII Oil Type & Capacity →🌧️ 1986 Lincoln Mark VII Wiper Blade Sizes →💡 1986 Lincoln Mark VII Light Bulb Sizes →📖 1986 Lincoln Mark VII Factory Service Manual →Powered by factory manual data from our partner network AllOEMManuals.com.
Frequently Asked Questions
What size tires does a 1986 Lincoln Mark VII take?
It depends on the trim: Base uses P215/70R15; Bill Blass Edition uses P215/70R15; LSC uses P215/65R15.
What is the tire pressure for a 1986 Lincoln Mark VII?
Refer to the tire pressure placard on your vehicle's driver side door jamb for exact cold inflation pressures.
What is the bolt pattern on a 1986 Lincoln Mark VII?
Bolt pattern data is available in the factory service manual.